Table of Contents
Advertisement
Control Panel Configuration (ICP-X7000)
The ICP-X7000 Integrated Control Panel is a control
panel that comprises multiple modules.
The control blocks and supported modules of the control
panel are described below.
Control block
Cross-point control block
AUX bus control block
Transition control block
Transition control block (simple type) MKS-X7021
Independent key transition control
block
Control panel configuration example
The modules of each control block are combined and
connected in a single row. Up to a 14-row control panel
can be configured.
4M/E configuration example using 36-button modules in cross-point control blocks and an AUX bus
control block
b
c
Module
MKS-X7017,
MKS-X7018,
a)
MKS-X7019
MKS-X7020
MKS-X7023
a
d
20
Control block
Flexi Pad control block
Key control block
Key fader control block
Device control block
Numeric keypad control block
Utility/shotbox control block
a) There are three types of cross-point modules: 36-button (MKS-X7017),
28-button (MKS-X7018), and 20-button (MKS-X7019).
They can be configured as a cross-point control block or AUX bus
control block in the Home > Setup > Panel > Config > M/E / AUX Assign
menu (19104.11).
e
f
Module
MKS-X7024
MKS-X7035
MKS-X7032
MKS-X7031TB
MKS-X7026
MKS-X7033
j
i
h
g
Advertisement
Table of Contents
