Table of Contents
Advertisement
Clip Players
Overview
The clip player is a function for recalling and playing
video content.
To use the clip player function, the MZS-X1800 Clip
Player License is required for each target box.
Areas Used by Clip Player
Two areas are used by clip players.
Clip player work area: An area for working with content.
When the system is powered off, the content in the
clip player work area will be lost.
Content storage: Area for saving content.
When used for clip player operations, the target
content is loaded into the clip player work area.
Length of content resources that can be
stored
The length (video duration) of content resources that can
be stored in the clip player work area varies depending on
the content bit rate. The maximum length for a single
content resource is 1 hour, regardless of the bit rate.
Bit rate
35 Mbps
18 Mbps
9 Mbps
Clip Player Outputs
The clip player outputs are the four channels Clip 1 to
Clip 4. You can recall and play content on each clip player
output channel. By assigning Clip 1 to Clip 4 to cross-
point buttons, you can use the outputs of the clip player as
input content.
Content length
Up to 30 minutes
Up to 1 hour
Up to 2 hours
Chapter
Notes
• Clip players operate on a box-by-box basis. When the
system signal format is 2160P, only two channels
comprising Clip 1 and Clip 2 can be used. The same
channels are linked and operate together, even though
the boxes are different.
• When content is loaded, it is loaded into the clip player
of all boxes in the switchers.
Group mode (combine channels)
When group mode is enabled on consecutive odd-
numbered and even-numbered clip player output
channels, the two channels are combined.
Clip player operations control the combined clip player
output channels.
When combined content is selected, content 1 and content
2 of the combined content are recalled on the two
combined clip player output channels, respectively.
Clip Player Content
The clip player plays video content.
Content is managed using the Home > Content menu.
For details, see "Chapter 20 Content Management"
(page 350).
Supported formats
The clip player supports content in the following file
formats.
Note
Operation is not guaranteed for all content in the
following file formats.
Video content:
• MOV file
Video: MPEG-4 AVC/H.264, 4:2:0 8-bit
Audio: AAC or PCM, 32 kHz/44.1 kHz/48 kHz, 16-bit/
24-bit
190
11
Advertisement
Table of Contents
