Executing A Copy/Swap - Sony MKS-X1115 User Manual

– Key snapshots
– Key memory
• When using DME channels on a key to be copied/
swapped, the DME channel selection status may not be
able to be copied/swapped depending on the number of
DME channels that can be used.
• When settings for a normal key are copied to an SL key,
the settings for functions that cannot be used on SL keys
are reset to the default values.
Wipes/DME wipes
Copy/swap wipe and DME wipe settings using the Home
> Utility > Copy/Swap > Wipe/DME Wipe menu
(18201.33).
Select a tab to change the target wipe for operation.
[Wipe] tab: Wipes
[Key Wipe] tab: Independent key transition wipes
[DME Wipe] tab: DME wipes
[Key DME Wipe] tab: Independent key transition DME
wipes
DMEs
Copy/swap DME settings using the Home > Utility >
Copy/Swap > DME menu (18201.34).

Executing a Copy/Swap

This section describes copying a wipe as an example.
1
Open the Home > Utility > Copy/Swap > Wipe/DME
Wipe menu (18201.33).
2
Select the [Wipe] tab.
3
In the list on the left, select a copy source wipe.
4
In the list on the right, select a copy destination wipe.
5
Press the [Copy] button.
To swap
Select the wipes to swap in the lists on the left and right,
and press the [Swap] button.
To undo a copy or swap
To undo a copy or swap immediately after copying/
swapping, press the [Undo] button.
Executing a copy using buttons
You can perform the following copy functions using
button operations on the control panel.
Copy target Using buttons
Switcher banks [SNAPSHOT] button in the Flexi Pad
control block
Copy target Using buttons
Keys [KEY1] button to [KEY8] button in key
operation mode in the Flexi Pad control
block
Copy source: Delegation buttons [KEY1]
to [KEY8] in the key control block
Copy destination: [KEY1] button to
[KEY8] button in key operation mode in
the Flexi Pad control block
Wipes [WIPE] button in the Flexi Pad control
block
DME wipes [DME WIPE] button in the Flexi Pad
control block
To copy using control panel buttons, press and hold the
copy source button and press the copy destination button.
Example:
Copying a wipe
Press and hold the [WIPE] button in the Flexi Pad control
block of the copy source switcher bank, and press the
[WIPE] button in the Flexi Pad control block of the copy
destination switcher bank.
252