Configuring Network Settings; Displaying The Host Name Of A Box; Displaying The Network Interface Of A Box; Configuring Lan Settings For Content File Transfer - Sony MKS-X1115 User Manual

Configuring Network
Settings

Displaying the Host Name of a Box

1
Open the System Configuration > Network >
Network Settings menu (20201.11).
2
Select a tab to change the box to display.
The host name of the box is displayed in [Host
Name].
For details about settings, see "Configuring Control
Panel Network Settings" (page 474).
Displaying the Network Interface of
a Box
1
Open the System Configuration > Network >
Network Settings menu (20201.11).
2
Select a tab to change the box to display.
3
Select a network interface to display in the network
interface list.
4
Press [Display Network I/F].
A window for the selected network interface appears.
For details about settings, see "Configuring Control
Panel Network Settings" (page 474).
Configuring LAN Settings for
Content File Transfer
You can set whether to use User LAN 1 for content file
transfers between primary/secondary boxes.
Note
Only the [Logical Box ID 1] tab can be configured.
1
Open the System Configuration > Network >
Network Settings menu (20201.11).
2
Select the [Logical Box ID 1] tab.
3
In the [LAN For Content Transfer] group, select the
content file transfer method.
[Ctrl LAN] button: Use only Ctrl LAN for content
file transfer.
[User LAN 1 / Ctrl LAN] button: Use User LAN 1
for content file transfer. Uses Ctrl LAN when the
primary box and secondary boxes are not
connected via User LAN 1.
Displaying the Default Gateway of a
Box
1
Open the System Configuration > Network >
Network Settings menu (20201.11).
2
Select a tab to change the box to display.
3
Press [Display Gateway].
The [Default Gateway Settings] window appears.
For details about settings, see "Configuring Control
Panel Network Settings" (page 474).

Displaying the DNS Server of a Box

1
Open the System Configuration > Network >
Network Settings menu (20201.11).
2
Select a tab to change the box to display.
3
Press [Display DNS Server].
The [DNS Server Settings] window appears.
For details about settings, see "Configuring Control
Panel Network Settings" (page 474).
462