Independent Key Transition Control Block - Sony MKS-X1115 User Manual

c Fader lever/transition indicator
Fader lever
Lock button
Transition indicator

Independent Key Transition Control Block

The independent key transition control block is used to
execute independent key transitions.
For details, see "Chapter 5 Transitions" (page 97).
a
a Independent key transition execution buttons
(assignable buttons)
You can assign execution buttons for independent key
transitions in the Home > Setup > Panel > Module >
Button Assign menu (19104.21).
For details about assigning buttons, see "Assigning
Control Panel Buttons" (page 408).
Name
Fader lever
Transition
indicator
Function name
Current Bank:
Key 1 Transition
to Key 8
Transition
Other Banks:
M/E-x Key 1
Transition to M/E-
x Key 8 Transition
(M/E-x = M/E-1 to
M/E-5)
P/P Key 1
Transition to P/P
Key 8 Transition
b
Notes
• The [KEYx ON] button (x = 1 to 8) and the [AUTO
TRANS] button for the same key are assigned as a set.
• You can also assign keys of any switcher banks (M/E-1
to M/E-5, P/P).
b Display
Displays the following information for each key assigned
to an independent key transition execution button.
• Key content name (key source name when a key source
is selected on a cross-point control block key bus)
• Currently used DME channel or resizer
• Transition rate
• Transition type
30
Description
Move this up or down to execute a
transition.
You can press the [KF] button, turning it
on, to use the fader lever as a keyframe
fader.
You can press the lock button to unlock
the fader lever and split it into two for use
as split faders.
Displays the transition progress using
LEDs.
Button Description
name
KEY1 ON Inserts or removes a key
to KEY8 instantaneously.
ON If a key is currently
inserted, the button is lit
amber.
AUTO Inserts or removes a key
TRANS automatically with the set
transition rate and
transition type.
During the transition, the
button is lit amber.
KEY1 ON Inserts or removes a key
to KEY8 instantaneously.
ON If a key is currently
inserted, the button is lit
amber.
AUTO Inserts or removes a key
TRANS automatically with the set
transition rate and
transition type.
During the transition, the
button is lit amber.