Setting An Hdr Converter - Sony MKS-X1115 User Manual

Note
When the system signal format is 720P, a format
converter cannot be used.
Setting the conversion format
You can set the signal format of an output signal to
convert by the format converter.
Notes
• Field frequency and frame frequency conversion is not
supported.
• If a conversion format that is different from the system
signal format is configured, the ancillary data will be
deleted.
The signal formats that can be converted are given below.
System signal format
(frequency)
2160P 2SI
(59.94, 50)
1080P
(59.94, 50)
1080i
(59.94, 50)
a) Configurable only for 100G IP output.
b) Configurable only for SDI output.
c) Only the first number output in each group of four outputs can be set. The
settings of the outputs in each group are linked and change accordingly.
1
Open the Home > Setup > System > Output > FC
Format menu (19101.44).
2
Select a tab to switch the target to set.
[Output] tab: Output converter format settings
[Dedicated Out] tab: Dedicated output converter
format settings
3
Select the target output to set.
To select and set multiple outputs, place a check mark
beside the target outputs to set.
To select and set all outputs, place a check mark in the
Select All checkbox.
4
Press the [FC Format] button and select an output
signal format from the pull-down list.
Signal format of output
signal
1080i
1080P
a)
2160P 2SI
b) c)
2160P 2SI 3G
b)
2160P 2SI 12G
720P
1080i
1080P
720P
1080i

Setting an HDR Converter

You can set the output signal OETF, color space, and
HDR converter for outputs that have color corrector/HDR
converter enabled.
For details about each HDR conversion item, see
"Setting HDR" (page 370).
For details about outputs that can be configured with a
color corrector/HDR converter, see "Selecting Outputs
Configurable with a Color Corrector/HDR Converter"
(page 378).
Notes
• To use the HDR converter function, the MZS-X1750
HDR Converter License (option) is required for each
target box.
• When the system signal format is 720P, an HDR
converter cannot be used.
1
Open the Home > Setup > System > Output > HDR
Converter menu (19101.46).
The system OETF, color space, and HDR settings are
displayed in [System Settings].
2
Select a tab to switch the target to set.
[Output] tab: Output HDR converter settings
[Dedicated Out] tab: Dedicated output HDR
converter settings
3
Select the target output to set.
To select and set multiple outputs, place a check mark
beside the target outputs to set.
To select and set all outputs, place a check mark in the
Select All checkbox.
4
Press the [Output Signal OETF] button and select an
OETF from the pull-down list.
Select [SDR], [HLG], [PQ], [S-Log3 (HDR)], or
[S-Log3 (Live HDR)].
5
Press the [Color] button and select a color space from
the pull-down list.
Select [BT.709] or [BT.2020].
6
Enable/disable the system settings using the [Follow
System Settings] switch.
On: Enable system settings. Apply the system
settings to the output signal.
Off: Disable system settings. Apply different settings
than the system settings to the output signal.
380