Table of Contents
Advertisement
When the [Speed] button is selected, set the following
parameter.
No.
Parameter
Adjustment
1
Speed
Rotation speed of pattern
• A value of –100.00 corresponds
• A value of +100.00
• A value of 0.00 corresponds to
To invert a mask area
Set the [Invert] button to the on state.
to 4 revolutions/second
counterclockwise rotation.
corresponds to 4 revolutions/
second clockwise rotation.
no rotation (stationary).
Freeze Effects
The following three types of freeze effects can be set.
Hard freeze: Generate a still image at an arbitrary
position.
Time strobe: Generate still images at fixed intervals.
Film: Generate frames like in movie films.
This section describes the menu for DME channel 1 as an
example.
Note
When the system signal format is 720P, Film cannot be
set.
Setting a Freeze
1
Open the Home > DME > Channel1 > Freeze menu
(15101.41).
2
In the [Freeze] group, select a type of freeze.
Hard Freeze: Hard freeze
Time Strobe: Time strobe
Film: Film
When the [Time Strobe] button is selected, set the
following parameters.
No.
Parameter
1
Duration
2
Live
When the [Film] button is selected, set the following
parameter.
No.
Parameter
1
Film
Note
When the system signal format is 720P, the [Film]
button is grayed out and cannot be changed.
212
Adjustment
Freeze interval
Percentage of video time
between still images
Adjustment
Frame rate
Advertisement
Table of Contents
