Parts Identifications of the Connector Panel
D1-DAP
DIGITAL IN
DIGITAL OUT
REMOTE
BKPF-291
4(E)
DIGITAL IN (digital input) connector (BNC type)
To input a 4:2:2-component serial digital video signal.
Active-through output connector (BNC type)
This connector outputs a serial digital video signal supplied to the
DIGITAL IN connector whose waveform has been shaped.
1
2
DIGITAL OUT (digital output) connectors (BNC type)
These connectors output the signal obtained by adjusting the signal supplied to
3
the DIGITAL IN connector.
Connectors 1 to 4 output the same signal.
4
REMOTE connector (BNC type)
To connect to an S-BUS (PN) communication network. Use a commercially
available T-bridge and coaxial cables (BELDEN8281 or equivalents) for
connection.