Key Control Block - Sony MKS-X1115 User Manual

• The [UNDO] button cannot be used in macro operation
mode. Also, the [DEL] button cannot be used in edit
mode.
Bank selection buttons
Function Button Description
name name
Bank 0 to BANK0 to The memory recall section
Bank 99 BANK99 switches to the register display
for the selected bank.
Bank BANK SEL Enter a bank number to switch
Select the memory recall section to the
register display for the selected
bank.

Key Control Block

The key control block is used to adjust and modify keys.
a
b
c
d
e
a Delegation buttons
Button Description
name
M/E1 to Assigns a switcher bank (M/E-1 to M/E-5,
M/E5 P/P) to the key control block.
P/P
KEY1 to • Assigns a key (key 1 to key 8) to the key
KEY8
control block.
• You can press and hold an [M/E1] to
[M/E5] button or [P/P] button and then
press a [KEY1] to [KEY8] button to return
the key settings to the initial settings.
b Memory recall section (memory recall buttons)
This section displays the functions assigned to the buttons
for the selected operation mode.
The top right button is used to display the selected pattern
number, register number, macro event number, transition
rate input value, and other status display (excluding in
key operation mode).
When a macro is recalled in macro operation mode, the
bottom center button displays the executed event number
and the total number of events.
Numeric keypad mode
Pressing the [BANK SEL] button, [PTN NO.] button, or
[PAUSE] button switches the memory recall section to
numeric keypad mode, where you can enter bank
numbers, wipe pattern numbers, and pause event times.
The currently set numeric value or the value entered in
numeric keypad mode is displayed on the top right button.
For details, see "Chapter 6 Keys" (page 119).
f
Button Description
name
TRANS • Used to check the DME channel used in a
transition.
• You can press and hold a [KEY1] to
[KEY8] button and press the [TRANS]
button to check the DME channel used in
an independent key transition.
• While the [TRANS] button is selected, you
can press a [DME1] to [DME4] button to
assign a DME channel to use in a DME
wipe.
32
g