Stamping Scanned Originals (Verif. Stamp) - Sharp MX-4100N Operation Manual

Hide thumbs Also See for MX-4100N:
Table of Contents

Advertisement

STAMPING SCANNED ORIGINALS (Verif. Stamp)

This function stamps each original that is scanned using the automatic document feeder, allowing you to verify that all
originals were correctly scanned.
Originals
• To use this function, the optional stamp unit must be installed.
• When using USB memory mode, connect the USB memory device to the machine before performing the procedure below.
1
Specify the destination.
ENTERING DESTINATIONS
2
When scanning to USB memory, there is no need to specify the destination. Go to step 3.
Select the special modes.
(1) Touch the tab of the mode that you wish to use.
3
(2) Touch the [Special Modes] key.
SPECIAL MODES
Position of stamp
(page 5-18)
(page 5-71)
Originals are
scanned
Insert the originals face up in the
document feeder tray.
5-94
SCANNER/INTERNET FAX
An "O" mark is
stamped
in fluorescent
pink.
Contents

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mx-4101nMx-5001nMx-4110n

Table of Contents