Problems Related To Reception - Sharp MX-4100N Operation Manual

Problem
Transmission does
not begin at the
specified time.

PROBLEMS RELATED TO RECEPTION

Problem
Printing does not take
place after reception.
Manual reception /
polling reception are
not possible.
The received image is
faint.
Point to check
Is the machine's clock set to the correct
time?
Is a transmission in progress?
Point to check
Does a message appear in the display
instructing you to add toner or paper?
(Printing is not possible when this
screen appears.)
Does a password entry screen appear?
Has cut-off printing been disabled in the
system settings (administrator)?
Is forwarding (Inbound Routing function)
selected in the Web page for a received
fax?
Is little free memory remaining?
Is the original that was faxed also faint?
Set the clock to the correct time.
➞ System Settings > "Default Settings" > "Clock" >
"Clock Adjust"
If another transmission is in progress when the specified
time arrives, the timer operation will begin after that
transmission is finished.
Restore printing capability as instructed by the
message.
"Hold Setting for Received Data Print" is enabled. Enter
the correct password with the numeric keys.
If you do not know the password, check with your
administrator.
If "Print Actual Size Cut off Disabled" is enabled in "Print
Style Setting" in the system settings (administrator) and
a fax is received that is larger than any paper that is
loaded, the fax will be received to memory without being
printed. (However, when a fax longer than
11" x 17" (A3) size is received, it will be printed using
multiple sheets of paper.)
Load the same size of paper as the received fax.
When the Inbound Routing function is enabled in the
Web pages, received faxes are automatically forwarded
to a specified address. If "Print at Error" is selected
when Inbound Routing is enabled, received faxes will
only be printed when an error occurs. If you need to
print a received fax, ask your administrator.
Free memory by printing faxes received by confidential
reception and other received data that is protected by a
password, and by deleting data stored in memory
boxes.
Ask the other party to send the fax again using a
suitable (darker) exposure setting.
8-28
TROUBLESHOOTING
Solution
Solution
Contents