Finisher Maintenance; Replacing The Staple Cartridge - Sharp MX-4100N Operation Manual

FINISHER MAINTENANCE

When the staple cartridge runs out of staples, a message will appear in the operation panel. Follow the procedure below
to replace the staple cartridge.

Replacing the staple cartridge

1
2
3
4
5
BEFORE USING THE MACHINE
Open the cover.
While pressing the lever over to the left,
slide the finisher to the left until it stops.
Gently slide the finisher until it stops.
Lower the staple case release lever and
remove the staple case.
Pull the staple case out to the right.
Remove the empty staple cartridge from
the staple case.
Insert a new staple cartridge into the
staple case as shown.
Push the staple cartridge in until it clicks into place.
1-44
Contents