Sharp MX-4100N Operation Manual page 574

(1)
Scan/Special Modes
Card Shot
3
X
2
Y
4
X
• The send size will be selected automatically based on the entered original size.
• After selecting Card Shot, you can touch the [Original] key in the base screen to change the original scan size or the
send size. In this case, the screen of this step appears when you touch the scan size key. For the procedure for
setting the send size, see
Press the [COLOR START] key or the [BLACK & WHITE START] key to scan the
front side of the card.
5
If the destination is an Internet fax destination, press the [BLACK & WHITE START] key.
To cancel scanning...
Press the [STOP] key (
Turn the card over and press the [COLOR START] key or the [BLACK & WHITE
START] key to scan the reverse side of the card.
Press the same [START] key that was used to scan the front side.
6
Before scanning the back of the card, you can touch the [Configure] key in the touch panel to change the exposure.
To cancel scanning...
Press the [STOP] key (
(A) (B) (2)
OK
Cancel OK
3
(1 8 1/2)
8
Fit to
inch
Send Size
1
(1 8 1/2)
8
inch
Size Reset
Y
"Specifying the send size of the
) to cancel the operation.
) to cancel the operation.
Specify the original size.
(1) Enter the original size.
• Touch the [X] key and enter the horizontal dimension
(X) of the original with the
• Touch the [Y] key and enter the vertical dimension (Y)
of the original with the
(A) To return the original size to the default size, touch the
[Size Reset] key.
(B) To automatically enlarge or reduce the image to fit the
send size, touch the [Fit to Send Size] key. If you wish
to scan the original at the entered original size, there
is no need to touch this key.
(2) Touch the [OK] key.
image" (page 5-59).
5-84
SCANNER/INTERNET FAX
keys.
keys.
Contents