Originals; Placing The Original; Placing Originals In The Automatic Document Feeder - Sharp MX-4100N Operation Manual

ORIGINALS

This section explains how to place originals in the automatic document feeder and on the document glass.

PLACING THE ORIGINAL

PLACING ORIGINALS IN THE AUTOMATIC DOCUMENT
FEEDER
This section explains how to place originals in the automatic document feeder.
Allowed original sizes
Minimum original size
Standard sizes
(Minimum size that can be automatically detected)
5-1/2" (height) x 8-1/2" (width)
A5: 148 mm (height) x 210 mm (width)
Non-standard sizes
(Minimum size that can be specified manually)
5-1/8" (height) x 5-1/2" (width)
131 mm (height) x 140 mm (width)
When the original is a non-standard size, see the appropriate explanation below for the mode you are using.
☞
2. COPIER "SPECIFYING THE ORIGINAL
☞
4. FACSIMILE "IMAGE
☞
5. SCANNER / INTERNET FAX
Allowed original weights
MX-4101N/5001N
MX-4000N
To scan originals from 9 lbs. to 14 lbs. (35 g/m
without using "Slow Scan Mode" may result in original misfeeds.
When "Slow Scan Mode" is selected, automatic 2-sided scanning is not possible.
SIZE" (page 2-29)
SETTINGS" (page 4-45)
"IMAGE SETTINGS" (page 5-53)
1-sided copying: 9 lbs. to 34 lbs. (35 g/m
2-sided copying: 15 lbs. to 34 lbs. (50 g/m
1-sided copying: 9 lbs. to 34 lbs. (35 g/m
2-sided copying: 15 lbs. to 28 lbs. (50 g/m
2
to 49 g/m
BEFORE USING THE MACHINE
Maximum original size
Standard sizes
(Maximum size that can be automatically detected)
11" (height) x 17" (width)
A3: 297 mm (height) x 420 mm (width)
12" x 18" size paper (A3W) cannot be used.
Non-standard sizes
(Maximum size that can be specified manually)
Copy mode: 11-5/8" (height) x 17" (width)
297 mm (height) x 432 mm (width)
Image send mode: 11" (height) x 39-3/8" (width)
297 mm (height) x 1000 mm (width)
2
to 128 g/m
2
to 128 g/m
2
to 128 g/m
2
to 105 g/m
2
), use "Slow Scan Mode" in the special modes. Scanning
1-37
2
)
2
)
2
)
2
)
Contents