Sharp MX-4100N Operation Manual page 397

Resending to unsuccessful broadcast transmission destinations
The results of a completed broadcast transmission can be checked in the job status screen. If transmission to any of the
destinations failed, resend the fax to those destinations.
1
Print Job Scan to
Address Set Time
1 Broadcast0001 10:00 04/01 020/003 Connecting
2 0123456789 10:05
3
AAA AAA 10:22
4 10:30
BBB BBB
5 10:33
Broadcast
2
If the broadcast transmission included destinations of different modes, the same broadcast transmission key will
appear in each of those modes.
(1)
Print Job Scan to
Address Start Time
Broadcast0001 10:00 04/01 010/003 NG000000
10:05
Broadcast0002
10:22
CCC CCC
10:30
0123456789
3
"Broadcastxxxx" will appear as the destination of the broadcast job key. The job control number that appeared in the
touch panel when scanning ended appears in "xxxx".
JOB STATUS
Fax Job Internet Fax
Pages Status
Job Queue
1
04/01 000/004 Waiting Complete
1
04/01 000/004 Waiting
04/01 000/010 Waiting
04/01 000/010 Waiting
Detail
Priority
Stop/Delete
(2)
Fax Job
Pages Status
Job Queue
04/01 001/001 Send OK 1 Complete
1
04/01 004/004 Send OK
04/01 010/010 Send OK
Detail
Call
Press the [JOB STATUS] key.
Touch the [Complete] key.
If the job status screen of fax mode does not appear, touch the
[Fax Job] tab.
Display details on the broadcast
transmission.
(1) Touch the key of the completed broadcast
transmission.
(2) Touch the [Detail] key.
4-42
FACSIMILE
Contents