Replacing The Stamp Cartridge - Sharp MX-4100N Operation Manual

REPLACING THE STAMP CARTRIDGE

If a stamp unit (AR-SU1) is installed on the automatic document feeder and the stamp has become faint, replace the
stamp cartridge (AR-SV1).
Supplies
Stamp cartridge (2 in package) AR-SV1
MX-4101N/5001N
1
2
3
4
Open the automatic document feeder.
Remove the document backplate sheet
from the automatic document feeder.
Remove the sheet slowly. Place the removed sheet with the
side that was attached face up on the document glass.
Grasp the tab on the stamp unit and pull
the unit out.
Remove the stamp cartridge (A).
(A)
1-75
BEFORE USING THE MACHINE
Contents