Sharp MX-4100N Operation Manual page 483

• Completed job
Message
"Send OK" Transmission completed.
"In Memory" Reception completed but the fax
has not been printed.
"Received" Printed received fax data.
"Forward OK" The received fax has been
forwarded.
"Stopped" The job was stopped.
"Delete" Deleted received data in the image
check screen.
"Number of Completion of a broadcast
successful transmission, serial polling or
transmission inbound routing operation.
destinations / If transmission to 3 destinations
Total was successful out of a total of 5,
destinations "003/005" will appear.
OK"
"No An error occurred because there
response" was no response from the
destination.
"Busy" An error occurred because the
other party was busy.
"Reject A fax was sent from a party that
Reception" has been blocked by the anti junk
fax function.
"NGxxxxxx" Transmission/reception was not
successful because a
communication error occurred (a
6-digit error code appears in
xxxxxx.)
"Error" An error occurred while the job was
being executed.
Status
4-128
FACSIMILE
Contents