Entering An Address Manually - Sharp MX-4100N Operation Manual

ENTERING AN ADDRESS MANUALLY

Scan to E-mail, Internet fax, Network Folder and data entry mode addresses can be manually entered.
(2)
15 To
5 10
Condition
Settings
AAA AAA
Address Review
CCC CCC
1
Address Entry
EEE EEE
Global
GGG GGG
Address Search
III III
Sort Address
Freq.
Preview
Select the destination type.
2
• If you wish the destination to be a Cc destination, touch the [Cc] key.
• The [Bcc] key only appears when Bcc has been enabled using "Bcc Setting" in the system settings (administrator).
If you wish the destination to be a Bcc destination, touch the [Bcc] key.
• When Internet fax mode is selected, the base screen appears after the destination address is entered. However, if
"I-Fax Reception Report On/Off Setting" is enabled in the system settings (administrator), the reception report
request screen will appear. If you wish to receive a report, touch the [Yes] key. If not, touch the [No] key. (When
Direct SMTP is used, transmission confirmation is not performed.)
• System Settings (Administrator): I-Fax Reception Report On/Off Setting
This setting is used to request a reception report when an Internet fax is sent. When the destination is specified by directly
entering the address, a message will appear asking you if you wish to receive a report. (When Direct SMTP is used,
transmission confirmation is not performed.)
• System Settings (Administrator): Bcc Setting
This setting enables or disables Bcc delivery. When enabled, the [Bcc] key appears in the address book screen and the
delivery type selection screen.
Cc
BBB BBB
DDD DDD
FFF FFF
HHH HHH
JJJ JJJ
ABCD EFGH IJKL MNOP QRSTU VWXYZ
E-mail Network Folder
Internet Fax Direct SMTP
Display the address input screen.
(1) Touch the [Address Book] key in the base
screen.
1
Before touching the [Address Entry] key in the base
2
screen, touch the tab of the mode that you wish to use.
(2) Touch the [Address Entry] key.
etc.
Enter the destination address.
(1) Touch the key of the desired delivery
method.
• Touch the [E-mail] key to open the delivery method
selection screen. Normally the [To] key is touched.
• Touch the [Network Folder] key to open the network
folder entry screen. To specify a network folder, see
"SPECIFYING A NETWORK
• If you touched the [Address Entry] key in the base
screen in step 1, the delivery methods that can be
selected vary depending on the mode being used.
(2) Enter the destination address in the text
entry screen that appears.
Enter the destination address and touch the [OK] key.
For the procedure for entering text, see
TEXT" (page 1-79) in "1. BEFORE USING THE
MACHINE".
5-22
SCANNER/INTERNET FAX
FOLDER" (page 5-23).
"ENTERING
Contents