Clear All Job Log Data; Registration Adjustment; Optimization Of A Hard Disk - Sharp MX-4100N Operation Manual

Detect Standard in Auto Color
Mode
When the color mode is set to auto in copy mode, the
discrimination point for detecting whether originals are
color or black and white can be set to one of 5 levels. To
make it easier to detect a black and white original, adjust
the setting toward [Black & White]. To make it easier to
detect a color original, adjust the setting toward [Color].
Auto Switching of Finisher Trays
(When a finisher (large stacker) is installed.)
If the number of sheets on the upper finisher tray
reaches the sheet limit, output will automatically switch
to the lower tray.

Registration Adjustment

If the colors are out of place on the printed surface when
color printing is performed, the print positions of the
colors can be adjusted.
To perform this adjustment, touch the [Auto Adjustment]
key. A message will appear. Touch the [Execute] key.

Optimization of a Hard Disk

This function optimizes the hard drive of the machine by
defragmenting data. If a job is in progress, a message
will appear and optimization will not begin until the job is
finished. During optimization, the following operations
are not possible:
• Web page access, reception of print data
• Use of keys on the operation panel
• Turning off the power with the main power switch of
the machine.
• Auto Power Shut-Off
When optimization is completed, the machine will
automatically restart.
When the document filing function is frequently used
and output of files seems somewhat slow, optimizing
the hard drive may improve performance.

Clear All Job Log Data

This is used to clear the entire job log. (There is normally
no need to use this function.)
A log file is kept of jobs run on the machine. The job log
can be used to check general use of the machine. The
job log can be written to a computer in CSV format using
a Web browser.
7-65
SYSTEM SETTINGS
Contents