Default Settings; Clock Adjust - Sharp MX-4100N Operation Manual

Default Settings

The default settings for operation of the machine can be configured. Touch the [Default Settings] key and select the settings.

Clock Adjust

Use this to set the date and time in the machine's built-in clock.
Set the time.
Item
Specify Time Zone
Date&Time Settings
Synchronize with Internet Time Server
Daylight Saving Time Setting
Enable daylight saving time.
Item
Daylight Saving Time Setting
Select Setting Type
Start Time
Completing Time
Adjustment Time
Date Format
The format used to print the date on lists and other output can be changed.
Item
Current Setting
Format
Separator
Day-Name Position
Time Display
If "Disabling of Clock
cannot be set.
If your region is ahead of GMT (Greenwich Mean Time), select [+]. If your region is
behind GMT, select [-]. Next, specify the time difference between your region and
GMT in hours and minutes.
Select and set the year, month, day, hour, and minute.
This can be used when the machine is connected to the Internet. The machine's time
is automatically adjusted to the time of an Internet time server.
Select whether or not the Daylight Saving Time Setting is enabled. If disabled, the
following settings will not be possible.
Specify whether the starting and ending day of daylight saving time are to be set
using the day of the week or the date.
Set the starting time of daylight saving time. Set the starting month. If you selected "Day
of the Week" in "Select Setting Type", set the starting week of daylight saving time and
then the starting day. If you selected "Date" in "Select Setting Type", set the starting date.
Set the hour and minute and the UTC (Coordinated Universal Time) setting.
Set the ending time of daylight saving time in the same way as you set the starting
time.
Set the time that adjustment will take place when daylight saving time begins.
The current time appears in the format set in the date format settings.
Set the order of display of the year, month, and day (YYYY/MM/DD).
Select one of three symbols or a blank space for the separator used in the date.
Select whether the day name appears before or after the date.
Select 12-hour format or 24-hour format for the time.
12-Hour Display: 12:00AM to 11:59AM/12:00 to 11:59PM
24-Hour Display: 00:00 to 23:59
Adjustment" (page 7-61) has been enabled in the system settings (administrator), the date and time
Settings
Settings
Settings
7-11
SYSTEM SETTINGS
Contents