BEFORE USING THE MACHINE
This section provides basic information about the machine. Please read this chapter before using the machine.
PART NAMES AND FUNCTIONS
EXTERIOR
When using the
MX-4101N/5001N
(1)
Automatic document feeder
This automatically feeds and scans multiple originals. Both
sides of 2-sided originals can be automatically scanned.
☞
PLACING THE ORIGINAL
(2)
Front cover
Open this cover to switch the main power switch to "On"
or "Off" or to replace a toner cartridge.
☞
TURNING THE POWER ON AND OFF
☞
REPLACING THE TONER CARTRIDGES
1-69)
(3)
Paper pass unit*
This transfers output to the finisher (large stacker) or
saddle stitch finisher.
(4)
Operation panel
This is used to select functions and enter the number of
copies.
☞
OPERATION PANEL
* Peripheral device.
(1)
(page 1-37)
(page 1-15)
(page
(page 1-8)
BEFORE USING THE MACHINE
(2) (3)
(4)
(5)
(5)
Exit tray unit (right tray)
When installed, output can be delivered to this tray.
(6)
Output tray (center tray)
Output is delivered to this tray.
(7)
Finisher*
This can be used to staple output. A punch module can
also be installed to punch holes in output.
☞
FINISHER
(page 1-43)
1-3
(6)
When a finisher / saddle stitch
finisher is not installed
(7)
When a finisher is installed
*
Contents