Erasing Peripheral Shadows On The Image (Erase) - Sharp MX-4100N Operation Manual

ERASING PERIPHERAL SHADOWS ON THE
IMAGE (Erase)
The erase function is used to erase shadows on images produced when scanning thick originals or books. (This function
erases the parts of the image where shadows tend to form. The function does not detect shadows and erase only the
shadows.)
Scanning a thick book
Shadows appear here.
Erase modes
Edge Erase
Place the original.
1
Place the original face up in the document feeder tray, or face down on the document glass.
Enter the destination fax number.
2
☞
ENTERING DESTINATIONS
Select the special modes.
(1) Touch the [Special Modes] key.
3
(2) Touch the [Erase] key.
☞
SPECIAL MODES
Center Erase
(page 4-16)
(page 4-69)
Not using the erase
function
Shadows appear in the image.
Edge + Center Erase
4-73
FACSIMILE
Using the erase
function
No shadows appear.
Side Erase
Contents