Adjust The Color Balance - Sharp MX-4100N Operation Manual

(1)
Color Adjustments
Color Balance
Y
1
M
C
Bk
Examples of color balance adjustment
3
To return the color balance values to the default settings...
Touch the
The default color balance values are set in "Initial Color Balance Setting" in the system settings (administrator).
Press the [COLOR START] key.
Copying will begin.
If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you
have selected sort mode, change originals and press the [COLOR START] key. Repeat until all pages have been scanned
4
and then touch the [Read-End] key.
To cancel scanning and copying...
Press the [STOP] key (
To cancel a color balance setting...
Touch the [Cancel] key in the screen of step 3.
System Settings (Administrator): Initial Color Balance Setting
This is used to set the default values to which the color balance values return when the
(2), (3) (5)
OK
Cancel OK
2 3 4 5 6 7 8 All
The settings of all gradations
are moved toward +
The settings of all gradations
are moved toward -
key. The values of all eight gradations will return to the default color balance values.
).

Adjust the color balance.

(1) Select the color to be adjusted.
Select [Y] (yellow), [M] (magenta), [C] (cyan), or [Bk] (black).
If only the rectangular area around the letter in a key is
highlighted, the settings have been changed from the
factory default settings.
(2) Select the gradation to be adjusted.
Select the gradation with the
Touch the
gradations "1" to "8" or "All".
To adjust all eight gradations at once, move the
highlighting to "All".
(3) Adjust the density.
To darken the density of the selected gradation, touch the
[+] key. To lighten the density, touch the [-] key. Each time
one of the keys is touched, the indicator frame moves up
or down one level.
(4) To adjust other colors, repeat steps (1) to (3).
(5) Touch the [OK] key.
You will return to the special modes screen. Touch the
[OK] key to return to the base screen of copy mode.
2-125
COPIER
keys.
keys to move the highlighting to one of
key is pressed.
Contents