Stamping Scanned Originals (Verif. Stamp) - Sharp MX-M753U Operation Manual

STAMPING SCANNED ORIGINALS (Verif. Stamp)

This function stamps each original that is scanned using the automatic document feeder, allowing you to verify that all
originals were correctly scanned.
1
Originals
To use this function, the optional stamp unit must be installed.
1
Enter the destination fax number.
2
☞
ENTERING DESTINATIONS
(3)
Fax/Special Modes
Transaction
Verif.
Stamp
3
Own Name
Memory Box
Select
Sending
Line
Position of stamp
(page 4-17)
(4)
(2)
OK
Report
2
Polling 2
4-95
Originals 1
are
scanned
Insert the originals face up in the
document feeder tray.
Select "Verif. Stamp".
(1) Touch the [Special Modes] key.
☞
SPECIAL MODES (page 4-71)
(2) Touch the keys to switch through the
screens.
(3) Touch the [Verif. Stamp] key so that it is
highlighted.
(4) Touch the [OK] key.
FACSIMILE
An "O" mark is
stamped
in fluorescent
pink.
Contents