Sharp MX-4100N Operation Manual page 579

Scan/Special Modes
Program
Timer
Job
4
Build
Original
Count
If an original scan size has been specified, a message will appear when the [Mixed Size Original] key is touched. To
enable the Mixed Size Original setting, change the scan size setting to auto and then touch the [Mixed Size Original]
key again.
Press the [COLOR START] key or the [BLACK & WHITE START] key.
Scanning begins. A beep will sound to indicate that scanning is finished.
5
If the destination is an Internet fax destination, press the [BLACK & WHITE START] key.
To cancel scanning...
Press the [STOP] key (
• Once mixed size originals has been selected, an original scan size cannot be specified.
• When mixed size originals are set, automatic duplex scanning cannot be used (except MX-4101N/5001N).
• Rotate cannot be used when Mixed Size Original is enabled.
To cancel the Mixed Size Original setting...
Touch the [Mixed Size Original] key in the screen of step 4 so that it is not highlighted.
System Settings (Administrator): Original Feeding Mode
The original feeding mode can be set to always scan mixed size originals.
(1) (2)
OK
Dual Page
Erase
Scan
1
Suppress
Card Shot
2
Background
Slow Scan
Mixed Size
Mode
Original
File Quick File
) to cancel the operation.
Select the mixed size original setting.
(1) Touch the [Mixed Size Original] key so that
it is highlighted.
(2) Touch the [OK] key.
5-89
SCANNER/INTERNET FAX
Contents