Sharp MX-4100N Operation Manual page 180

3
If an incorrect number of copies is set...
Press the [CLEAR] key (
Press the [COLOR START] key or the [BLACK & WHITE START] key.
Copying will begin.
If you are using the document glass, change originals and press the [START] key. Repeat until all pages have been scanned
and then touch the [Read-End] key. (For the second original and following originals, use the same [START] key as you did for
the first original.)
The following screen appears when the [START] key is pressed.
After the message appears, tandem copying begins.
4
If tandem copying is not possible, the following screen appears.
To have the master machine make all copies, touch the [OK] key. To cancel the job, touch the [Cancel] key.
• To cancel scanning...
Press the [STOP] key (
• To cancel tandem copying...
Touch the [STOP] keys (
Set the number of copies (number of
sets) with the numeric keys.
Up to 999 copies (sets) can be set. When the [COLOR START]
key or the [BLACK & WHITE START] key is pressed, the
copies will automatically be divided between the master and
slave machines.
If an odd number of copies is set, the master machine will print
the extra set.
) and then enter the correct number.
Starting tandem operation.
Please wait.
Tandem output is not allowed.
Output all sets using master machine?
(Cancel will delete the job.)
OK
).
) on both the master machine and the slave machine.
2-59
Cancel
COPIER
Contents