Sharp MX-4100N Operation Manual page 639

[Original] key
When the [Original] key is touched, the following screen appears. This screen is used to change the original size and
select scanning settings for 2-sided originals.
(1) Touch the [Scan Size] key.
If the original is a non-standard size that cannot be detected by auto original size detection, touch the [Scan Size] key and specify the original size.
(2) Touch the [Store Size] key.
If you wish to store the file at a different size than the original size, touch the [Store Size] key and change the store size.
(3) Touch the appropriate orientation key.
If the top edge of the original is up, touch the
If the original is a 2-sided original, touch the [2-Sided Booklet] key or the [2-Sided Tablet] key as appropriate for the original type.
(4) Touch the [OK] key.
The settings are stored and you return to the Scan to HDD screen.
[Exposure] key
To adjust the exposure, touch the [Exposure] key.
Select an appropriate exposure mode for the original and touch the
When finished, touch the [OK] key.
(1) Select the appropriate original type for the original to be scanned.
(2) Select [Auto] or [Manual].
If you selected [Manual], touch the
lighter image, touch the
When the exposure is set to [Auto], the
(A): Moirè Reduction
To reduce the moirè effect when scanning printed matter, touch the [Moirè Reduction] checkbox so that a checkmark
(3) Touch the [OK] key.
The settings are stored and you return to the Scan to HDD screen.
Scan to HDD/Original
Original
key. If the top edge of the original is to the left, touch the
Scan to HDD/Exposure
Exposure
1
or key to adjust the exposure. (For a darker image, touch the
key.)
(1)
Scan Size 100% Store Size
Auto 8½x11
2-Sided 2-Sided
Booklet Tablet
(3)
or
Auto
Original Image Type
Manual
Text
Prtd.Photo
Printed
Photo
3 5
Moiré
Reduction
(2) (A)
keys cannot be used.
6-19
DOCUMENT FILING
(2) (4)
OK
Auto
Image Orientation
key to adjust the exposure level.
(3)
OK
Text/
Text/Photo
Photo Map
(1)
Contents
key.
key. For a
appears.