Stamping Scanned Originals; Stamp - Sharp MX-4100N Operation Manual

STAMPING SCANNED ORIGINALS (Verif. Stamp)
This function stamps each original that is scanned using the automatic document feeder, allowing you to verify that all
originals were correctly scanned.
Originals
To use this function, the optional stamp unit must be installed.
1
Enter the destination fax number.
2
☞
ENTERING DESTINATIONS
(3)
Fax/Special Modes
Verif.

Stamp

3
Own Name
Select
Position of stamp
(page 4-16)
(4)
(2)
OK
Transaction
Report
2
Polling
Memory Box 2
Originals are
scanned
Insert the originals face up in the
document feeder tray.
Select "Verif. Stamp".
(1) Touch the [Special Modes] key.
☞
SPECIAL MODES
(2) Touch the
screens.
(3) Touch the [Verif. Stamp] key so that it is
highlighted.
(4) Touch the [OK] key.
4-93
FACSIMILE
An "O" mark is
stamped
in fluorescent
pink.
(page 4-69)
keys to switch through the
Contents