Inserting Covers In Copies (Cover Settings) - Sharp MX-4100N Operation Manual

INSERTING COVERS IN COPIES (Cover Settings)

A different type of paper can be inserted at the positions corresponding to the front and back covers of a copy job.
This is useful for arranging documents in an attractive format and for using a different type of paper as a cover on an
estimate sheet or similar document.
Covers can be used in combination with inserts.
Copying on a front cover and inserting together with a back cover
AAA
1 2
Front cover paper
Indicator
line
1
The document glass cannot be used.
Select the special modes.
(1) Touch the [Special Modes] key.
2
(2) Touch the [Covers/Inserts] key.
☞
Special modes menu (1st screen)
Special Modes
Covers/Inserts
Cover Setting
Front
3
Cover
Back
Cover
3 4 5
Originals
Back cover paper
(page 2-43)
OK
OK
Cancel
Inserts Setting
Insertion
Type A
Insertion
Settings
Insertion
Type B
Tray Settings Page Layout
Insert the originals face up in the
document feeder tray.
Insert the originals all the way into the document feeder tray.
Multiple originals can be placed in the document feeder tray.
The stack of originals must not be higher than the indicator line
on the tray.
Touch the [Front Cover] key.
2-62
COPIER
Front cover
Back cover
Copies
Contents