Loading Paper; Important Points About Paper; Names And Locations Of Trays; The Meaning Of "R" In Paper Sizes - Sharp MX-4100N Operation Manual

LOADING PAPER

IMPORTANT POINTS ABOUT PAPER

This section provides information that you should know before loading paper in the paper trays.
Be sure to read this section before loading paper.

NAMES AND LOCATIONS OF TRAYS

The names of the trays are as follows.
Tray 3 (when a stand/1 x 500 sheet
paper drawer or a stand/2 x 500
sheet paper drawer is installed)
Tray 4 (when a stand/2 x 500 sheet
paper drawer is installed)

THE MEANING OF "R" IN PAPER SIZES

Some original and paper sizes can be placed in either the vertical or the horizontal orientation. To differentiate between
vertical and horizontal orientations, paper sizes in the horizontal orientation will be followed by an "R" (for example,
8-1/2" x 11"R, A4R).
Sizes that can be placed only in the horizontal orientation (12" x 18", 11" x 17", 8-1/2" x 14", 8-1/2" x 13", A3W, A3, B4)
do not include the "R" in their size indication.
8-½" x 11"R
(A4R)
Horizontal orientation
"R" is appended.
Tray 1
Tray 2
8-½" x 11"
(A4)
Vertical orientation
"R" is not appended.
1-27
BEFORE USING THE MACHINE
Bypass tray
Tray 5 (when a large
capacity tray is installed)
11" x 17"
(A3)
Can be placed only in the
horizontal orientation
"R" is not appended.
Contents