Chapter 2
2
BEFORE USING THE MACHINE
This chapter contains basic information that should be read before using the machine.
PART NAMES AND FUNCTIONS
16
When the network
expansion kit is installed.
15
16
17
Glass cleaner (when the RSPF is installed)
1
Use to clean the original scanning glass.
Document feeder cover (when the RSPF is installed)/
2
document cover
Open to make copies from the document glass.
Document glass
3
Place an original that you wish to scan face down
here.
(p.44)
Handles
4
Use to move the machine.
Power switch
5
Press to turn the machine power on and off.
Paper output tray
6
Copies and prints are deposited to this tray.
Operation panel
7
Contains operation keys and indicator lights.
Front cover
8
Open to remove paper misfeeds and perform
machine maintenance.
Paper trays
9
The tray holds 250 sheets of paper.
2
3
5
6
(p.124)
(p.44)
(p.37)
(p.33)
(p.116, p.117, p.121)
(p.38)
1
2
7
4
8
9
Side cover
10
Open to remove paper misfeeds and perform
machine maintenance.
Side cover handle
11
Pull to open the side cover.
Bypass tray guides
12
Adjust to the width of the paper.
Bypass tray
13
Paper including special paper (such as transparency
film) can be fed from the bypass tray.
Bypass tray extension
14
Pull out when feeding large paper such as B4 and
A3 (8-1/2" x 14" and 11" x 17").
USB 2.0 connector (Type A) (when the network
15
expansion kit is installed)
Connect to the USB device.
USB 2.0 connector
16
Connect to your computer to use the printer and
scanner functions.
10BASE-T/100BASE-TX LAN connector
17
Connect to your network to use the printer and
scanner functions.
(p.14)
4
10
11
12
13
14
(p.115, p.116)
(p.115)
(p.40)
(p.40, p.55)
(p.40)
31