Table of Contents
Advertisement
BEFORE USING THE MACHINE
PART NAMES AND FUNCTIONS
(1)
Status indicator
(2)
Automatic document feeder
This automatically feeds and scans multiple originals.
Both sides of 2-sided originals can be automatically
scanned at one time.
► USING THE AUTOMATIC DOCUMENT FEEDER
(page 16)
(3)
Front cover
Open this cover to switch the main power switch to "On"
or "Off".
► TURNING ON THE POWER (page 13)
(4)
Operation panel
This panel hosts the [Power] button, [Power Save]
button/indicator, [Home Screen] button/indicator, main
power indicator and touch panel.
Use the touch panel to operate each of these functions.
An NFC touch point area also appears.
► OPERATION PANEL (page 14)
(5)
USB port (A type)
This is used to connect a USB device such as a USB
memory device to the machine.
Supports USB 2.0 (Hi-Speed).
(6)
Keyboard
Use this as a substitute for the soft keyboard displayed on
the touch panel.
* Peripheral device. For more information, see the User's Manual.
10
(1)
(2)
(3)
(4)
(9)
(10)(11) (12)(13)
(14)
(7)
Toner cover (Upper front cover)
Open this cover to replace the toner cartridge or to
remove misfed paper in the paper pass unit.
► REPLACING TONER (page 6)
(8)
Bypass tray
Use this tray to feed paper manually.
When loading paper larger than 8-1/2" × 11"R or A4R,
pull out the extension guide.
► LOADING PAPER IN OTHER TRAYS (page 21)
(9)
Curl correction unit*
This punches and outputs paper.
(10) Tray 1
Store paper in this tray. Up to 1200 sheets can be
stored.
► LOAD PAPER INTO THE TRAY 1/2 (page 19)
(11) Tray 2
Store paper in this tray. Up to 800 sheets can be stored.
► LOAD PAPER INTO THE TRAY 1/2 (page 19)
(12) Tray 3
Store paper in this tray. Up to 500 sheets can be stored.
► LOAD PAPER INTO THE TRAY 3/4 (page 20)
(13) Tray 4
Store paper in this tray. Up to 500 sheets can be stored.
► LOAD PAPER INTO THE TRAY 3/4 (page 20)
(14) Tray 5 (MX-LC12)*
Store paper in this tray. Up to 3500 sheets can be
stored.
(5)
(6)
(7)
(8)
Advertisement
Table of Contents
