BEFORE USING THE MACHINE
PART NAMES AND FUNCTIONS
(1)
(2)
(8)
(9)
(1)
Job separator (upper tray)
Received faxes and printed papers are delivered to this tray.
*
(2)
Output tray
Output is delivered to this tray.
(3)
Automatic document feeder
It automatically feeds and scans multiple originals. 2-sided
originals can be automatically scanned. For the
MX-3070N/3570N/4070N/5070N/6070N, both sides of 2-sided
originals can be automatically scanned at one time.
►
USING THE AUTOMATIC DOCUMENT FEEDER (page 15)
(4)
USB port (A type)
This is used to connect a USB device such as a USB memory
device to the machine.
Supports USB 2.0 (Hi-Speed).
(5)
Operation panel
This panel hosts the [Power] button, [Power Save]
button/indicator, error indicator, [Home Screen] key, main power
indicator, data notification indicator, and touch panel.
Use the touch panel to operate each of these functions.
►
OPERATION PANEL (page 13)
(6)
Exit tray unit (right tray)
Set so that paper is output into this tray as required.
*
(7)
Inner finisher
This staples paper. A punch module can also be installed to
punch holes in output paper.
You can also perform stapling manually.
*
(8)
Finisher
This staples paper. A punch module can also be installed to
punch holes in output paper.
*
(9)
Saddle Stitch Finisher
This staples and folds paper. A punch module can also be
installed to punch holes in output paper.
(10)
Finisher (large stacker)*
This staples paper. A punch module can also be installed to
punch holes in output paper.
You can also perform stapling manually.
* Peripheral device. For more information, see the User's Manual.
10
(3)
MX-3050N/3550N/
4050N/5050N/6050N
(10)
*
*
(3)
(4)
(5)
(11)
(12)
(13)(14) (15)(16)
(11)
Paper pass unit
Relay between the machine and the finisher or saddle stitch finisher.
(12)
Saddle Stitch Finisher (large stacker)*
This staples and folds paper. A punch module can also be
installed to punch holes in output paper.
You can also perform stapling manually.
(13)
Tray 1
Store paper in this tray. A maximum of 550 sheets (80 g/m
lbs.)) of paper can be loaded.
(14)
Tray 2 (when a low stand/550 sheet paper drawer or
stand/550/2x550/3x550/550&2100 sheet paper drawer is installed)
Store paper in this tray. A maximum of 550 sheets (80 g/m
lbs.)) of paper can be loaded.
(15)
Tray 3 (when a stand/2x550/3x550 sheet paper drawer is
*
installed)
Store paper in this tray. A maximum of 550 sheets (80 g/m
lbs.)) of paper can be loaded.
(16)
Tray 4 (when a stand/3x550 sheet paper drawer is installed)
Store paper in this tray. A maximum of 550 sheets (80 g/m
lbs.)) of paper can be loaded.
(17)
Tray 3 (when a stand/550&2100 sheet paper drawer is
*
installed)
Store paper in this tray. A maximum of 1200 sheets (80 g/m
lbs.)) of paper can be loaded.
(18)
Tray 4 (when a stand/550&2100 sheet paper drawer is
*
installed)
Store paper in this tray. A maximum of 900 sheets (80 g/m
lbs.)) of paper can be loaded.
(19)
Tray 5 (when a large capacity tray is installed)*
Store paper in this tray. A maximum of 3000 sheets (80 g/m
lbs.)) of paper can be loaded.
(20)
Front cover (MX-3050N/3070N/3550N/3570N/4050N/4070N)
Open this cover to switch the main power switch to "On" or "Off"
to replace a toner cartridge.
(21)
Toner cover (MX-5050N/5070N/6050N/6070N)
Open to replace a toner cartridge.
(22)
Front cover (MX-5050N/5070N/6050N/6070N)
Open to switch the main power switch to "On" or "Off".
(6)
(7)
MX-3050N/3070N/3550N/
3570N/4050N/4070N
(21)
(22)
(17)
(18) (19) (20)
*
2
(20
*
2
(20
2
(20
*
2
(20
2
(20
2
(20
2
(20