Target Module Switching Function; Selecting A Target Module When Starting The Setting Tool - Mitsubishi Electric MELSEC iQ-R Series User Manual

7.2

Target Module Switching Function

Series
MELSEC-Q series
MELSEC iQ-R series
Select whether to start the MELSEC iQ-R series SECS/GEM communication software setting tool as the RD55UP06-V setting
tool or the RD55UP12-V setting tool.
The setting can also be switched after starting up the setting tool.
A difference in specifications between target modules is as follows:
Item
The number of available Ethernet ports
*1 The CH2 port is not available for SECS communication.
Precautions
For software versions which can use the target module switching function, refer to the following:
Page 299 Added and Changed Functions

Selecting a target module when starting the setting tool

When starting the setting tool, select whether to start the tool as the RD55UP06-V setting tool or the RD55UP12-V setting
tool.
Window
This is displayed when starting the setting tool.
Displayed items
Item
Target module
[OK] button
[Cancel] button
SECS/GEM communication software
Non-GEM version


Specification for RD55UP06-V
1 port
Description
Select a module to be set in the setting tool.
A module can be switched to either of the following modules:
• RD55UP06-V
• RD55UP12-V
Click this to open the setting tool of a module selected for "Target module."
Click this to cancel the start of the setting tool.
GEM version


Specification for RD55UP12-V
*1
2 ports
7.2 Target Module Switching Function
GEM advanced version


7 BASIC FUNCTIONS
7
49