Eaton Powerware BladeUPS User Manual page 82

STANDARD SYSTEM INSTALLATION
74
Eaton BladeUPS (12 kVA) User's Guide
NOTE The BladeUPS parallel system can automatically assign identities to each UPS in the system based
on the order in which their CAN Bridge Cards are wired in Steps 9 through 12. For more information, see
"Auto-Identification" on page 117.
9. Install one of the two supplied blue terminating plugs (see Figure 60) into the
CAN IN port on the first UPS (UPS 1 in Figure 62).
Figure 60. Installing the Blue Terminating Plug (First UPS)
S
164201649 Rev 6 www.eaton.com/powerqualtiy
Blue Terminating Plug (CAN IN)