Eaton Powerware BladeUPS User Manual page 103

Table 8. Menu Map for Display Functions
Main Menu
UPS Status
Event Log
Measurements
For more information about
measurements, see
"Metering" on page 118.
Control
Settings
Identification
Turn UPS On/Off
The following table shows the basic menu structure.
NOTE Menu functions related to parallel systems appear only on paralleled UPSs.
Submenu
Parallel System
Output
Battery
Input
Load Receptacle
Go to Bypass Mode
Start Battery Test
Display Test
User Settings
Service Settings
On and Off Options
Eaton BladeUPS (12 kVA) User's Guide
Display Information or Menu Function
System Normal | High Efficiency Power: % /
Battery Resting | Battery Floating UPS in Parallel Mode /
Parallel Unit Number x / Units on CAN Bus / Units on Load
Displays up to 100 events and alarms
kW [by unit] / kW [Parallel total]
Voltage L-N and L-L / Current / Frequency / Power kW / Power kVA / Power pf
Voltage / Current / Runtime
Voltage L-N and L-L / Current / Frequency
Outlet Voltage / Outlet Current / Outlet Power kW / Outlet Power kVA / Outlet
Frequency
Transfers the UPS system to internal Bypass mode
When this command is active, the option changes to Go to Normal Mode.
Schedules a battery test. The battery test may not start immediately.
Four different selectable tests for the front panel functions: the LEDs cycle through,
the alarm beep sounds, the backlight turns off and on, and the pixels scroll through to
test the LCD.
See Table 9 for detail.
Not available.
Type / Part Number / Serial Number / Firmware / Display / System Display / CAN
Bridge
Turn UPS Off / Turn System On / Turn System Off
S
164201649 Rev 6 www.eaton.com/powerqualtiy
OPERATION
95