Changing The Language; Display Functions - Eaton Powerware BladeUPS User Manual

OPERATION
94
Eaton BladeUPS (12 kVA) User's Guide
The following table shows the indicator status and description.
Indicator Status
On
Flashing
Green
Off
On
Yellow
On
Yellow
On
Flashing
Red

Changing the Language

Press and hold the first button on the left for approximately five seconds to select the
language menu. This action is possible from any LCD menu screen.

Display Functions

As the default or after 15 minutes of inactivity, the LCD displays the selectable Start
screen. The default is the Eaton logo and can be changed to the Mimic screen in the
User Settings menu.
The backlit LCD automatically dims after a long period of inactivity. Press any button
to restore the screen.
Press any button to activate the menu options. Use the two middle buttons ( and )
to scroll through the menu structure. Press the
the button to select an option. Press the
previous menu.
S
164201649 Rev 6 www.eaton.com/powerqualtiy
Description
The UPS is operating normally.
S The UPS is starting up or is shut down and waiting for power to
return.
S A new information message is active.
S Bypass is not available.
The UPS is turned off and will not turn on automatically.
The UPS is in Battery mode.
The UPS is in Bypass mode.
The UPS has an active alarm.
There is a new UPS alarm condition. See "Troubleshooting" on
page 135 for additional information.
button to enter a submenu. Press
ESC button to cancel or return to the