Eaton Powerware BladeUPS User Manual page 30

PREASSEMBLED SYSTEM INSTALLATION
22
Eaton BladeUPS (12 kVA) User's Guide
2. Remove the four anchor bolts from the bottom of the system (see Figure 7).
NOTE Eaton recommends using adjustable pliers to remove the anchor bolts.
3. If the leveling feet are not fully retracted, turn the leveling feet clockwise until
they are retracted (see Figure 7).
Figure 7. Locating the Leveling Feet and Anchor Bolts
S
164201649 Rev 6 www.eaton.com/powerqualtiy
Leveling Foot
Caster
Anchor Bolt