Specification Of Connector Of Encoder Cable - Delta ASDA-M Series User Manual

ASDA-M

3.1.5 Specification of Connector of Encoder Cable

Encoder connection diagram 1:
This diagram shows the connection between the servo drive and the motor encoder. It
NOTE
is not drew by the practical scale and specification will be different according to the
selected servo drive and motor model.
1) Please refer to the Section of Specification and Definition of Encoder Connector.
2) Please refer to Section 3.4 CN2 Connector.
Motor Model
ECMA-C1040FS (50W)
ECMA-C△0401S (100W)
ECMA-C△0602S (200W)
ECMA-C△0604S (400W)
ECMA-C△0604H (400W)
ECMA-C△08047 (400W)
ECMA-C△0807S (750W)
ECMA-C△0807H (750W)
ECMA-C△0907S (750W)
ECMA-C△0910S (1000W)
Revision December, 2014
Connector of Encoder Cable
Chapter 3 Wiring
3-9