Specification Of Connector Of Encoder Cable - Delta ASD-A2R-0221 Series User Manual

Chapter 3 Wiring ASDA-A2R Series

3.1.5 Specification of Connector of Encoder Cable

Encoder connection diagram 1:
This diagram shows the connection between the servo drive and the
NOTE
motor encoder. It is not drew by the practical scale and specification will
be different according to the selected servo drive and motor model.
1) Please refer to the Section of Specification and Definition of Encoder
2) Please refer to Section 3.5 CN2 Connector.
Motor Model
ECMA-C1040FS (50 W)
ECMA-C△0401S (100 W)
ECMA-C△0602S (200 W)
ECMA-C△0604S (400 W)
ECMA-C△08047 (400 W)
ECMA-C△0807S (750 W)
ECMA-C△0907S (750 W)
ECMA-C△0910S (1000 W)
3-10
Connector.
Connector of Encoder Cable
Revision December. 2014