Figure 47. Removing a 4 x 2.5-inch rear drive module cooling fan
Next steps
1.
Replace 4 x 2.5-inch rear drive module cooling
Installing a 4 x 2.5-inch rear drive module cooling fan
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3.
Remove the 4 x 2.5-inch rear drive module air
Steps
Align and lower the rear drive module cooling fan into the rear drive module until the fan clicks into place.
fan.
Safety
instructions.
Before working inside your
shroud.
system.
Installing and removing system components
91