Table of Contents
Advertisement
Figure 170. Removing the Serial COM port
5. Install the filler bracket if not replacing the serial COM port.
Next steps
1.
Replace the serial COM
Installing the serial COM port
The procedure to install serial COM port to Riser 3 or 4 is same.
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3.
Remove the air shroud
4.
Remove expansion card
Steps
1. Open the latch on the expansion card riser and remove the filler bracket from the expansion card riser.
2. Slide the serial COM port into the expansion card riser and close the latch.
port.
Safety
instructions.
Before working inside your
or
remove the GPU air
shroud.
riser.
system.
Installing and removing system components
221
Advertisement
Table of Contents
