Dell PowerEdge R7615 Installation And Service Manual page 118

Figure 80. 8 x 2.5 inch Universal SAS3 Low Profile with FPERC11
NOTE: Follow the sequential order as shown in the table to remove the cables, to install the cables follow the reverse
sequential order.
Table 75. 8 x 2.5 inch Universal SAS3 Low Profile with FPERC11
Order
1
2
3
4
118 Installing and removing system components
From
SIG_PWR_2 (system board power
connector)
SIG_PWR_1(system board power
connector)
CTRL_SRC_SB1 (fPERC controller
connector)
SL1_CPU1_PB2 (signal connector on
system board)
To
BP_PWR_1(backplane power connector)
BP_PWR_1(backplane power connector)
BP_DST_SA1 (backplane signal
connector)
CTRL_DST_PA1 (fPERC input
connector)