Figure 49. Removing a drive blank
Next steps
1.
Replace the drive
blank.
Installing a drive blank
Prerequisites
1. Follow the safety guidelines listed in the
2. If installed,
remove the front
Steps
Slide the drive blank into the drive slot until the release button clicks into place.
Figure 50. Installing a drive blank
Next steps
1. If removed,
install the front
Removing a drive carrier
Prerequisites
1. Follow the safety guidelines listed in
2.
Remove the front
bezel.
3. Using the management software, prepare the drive for removal. If the drive is online, the green activity or fault indicator
flashes while the drive is turning off. When the drive indicators are off, the drive is ready for removal. For more information,
see the storage controller documentation.
Safety
instructions.
bezel.
bezel.
Safety
instructions.
Installing and removing system components
93