Dell PowerEdge R7615 Installation And Service Manual page 122

Figure 84. 16 x 2.5 inch U.2 Gen4 Low Profile with 2 x FPERC11
NOTE: Follow the sequential order as shown in the table to remove the cables, to install the cables follow the reverse
sequential order.
Table 79. 16 x 2.5 inch U.2 Gen4 Low Profile with 2 x FPERC11
Order
1
2
3
4
5
6
7
8
9
10
122 Installing and removing system components
From
SIG_PWR_1 (system board power
connector)
SIG_PWR_1 (system board power
connector)
CTRL_DST_PA1 (fPERC input
connector)
CTRL_DST_PB1 (fPERC input
connector)
CTRL_SRC_PB1 (fPERC controller
connector)
CTRL_SRC_PA1 (fPERC controller
connector)
SL1_CPU1_PB2 (signal connector on
system board)
SL3_CPU1_PB2 (signal connector on
system board)
CTRL_SRC_PB1 (fPERC controller
connector)
CTRL_SRC_PA1 (fPERC controller
connector)
To
BP_PWR_1 (backplane power
connector)
BP_PWR_1 (backplane power
connector)
SL4_CPU1_PB2 (signal connector on
system board)
SL2_CPU1_PB2 (signal connector on
system board)
DST_PA2 and DST_PB2 (backplane
signal connector)
DST_PA1 and DST_PB1 (backplane signal
connector)
CTRL_DST_PA1 (fPERC input
connector)
CTRL_DST_PB1 (fPERC input
connector)
DST_PA2 and DST_PB2 (backplane
signal connector)
DST_PA1 and DST_PB1 (backplane signal
connector)