Table of Contents
Advertisement
Integrated Devices
To view the Integrated Devices screen, power on the system, press F2, and click System Setup Main Menu > System BIOS
> Integrated Devices.
Table 53. Integrated Devices details
Option
User Accessible USB Ports
Internal USB Port
iDRAC Direct USB Port
Integrated RAID Controller
Embedded NIC1 and NIC2
Embedded Video Controller
Current State of Embedded Video
Controller
SR-IOV Global Enable
OS Watchdog Timer
Description
Configures the user accessible USB ports. Selecting Only Back Ports On
disables the front USB ports; selecting All Ports Off disables all front and back
USB ports; selecting All Ports Off (Dynamic) disables all front and back USB
ports during POST. This option is set to All Ports On by default. When user
accessible USB ports is set to All Ports Off (Dynamic) the Enable Front
Ports Only option is enabled.
● Enable Front Ports Only: Enables or disables the front USB ports during
the OS runtime.
The USB keyboard and mouse still function in certain USB ports during the boot
process, depending on the selection. After the boot process is complete, the
USB ports will be enabled or disabled as per the setting.
Enables or disables the Internal USB Port. This option is set to On or Off.
This option is set to On by default.
The iDRAC Direct USB port is managed by iDRAC exclusively with no host
visibility. This option is set to ON or OFF. When set to OFF, iDRAC does not
detect any USB devices installed in this managed port. This option is set to
On by default. Enables or disables the integrated RAID controller. When set
to Disabled, the device is not visible to the operating system(OS). Enables or
disables the integrated RAID controller. When set to Disabled, the device is not
visible to the operating system(OS).
Enables or disables the integrated RAID controller. When set to Disabled, the
device is not visible to the operating system(OS).
Enables or disables the Embedded NIC1 and NIC2 options. If set to Disabled
(OS), the NIC may still be available for shared network access by the
embedded management controller. Configure the Embedded NIC1 and NIC2
option by using the NIC management utilities of the system.
Enables or disables the use of Embedded Video Controller as the primary
display. When set to Enabled, the Embedded Video Controller will be the
primary display even if add-in graphic cards are installed. When set to
Disabled, an add-in graphics card will be used as the primary display. BIOS
will output displays to both the primary add-in video and the embedded video
during POST and pre-boot environment. The embedded video will then be
disabled right before the operating system boots. This option is set to Enabled
by default.
NOTE:
When there are multiple add-in graphic cards installed in the
system, the first card discovered during PCI enumeration is selected as the
primary video. You might have to re-arrange the cards in the slots in order
to control which card is the primary video.
Displays the current state of the embedded video controller. The Current
State of Embedded Video Controller option is a read-only field. If the
Embedded Video Controller is the only display capability in the system (that
is, no add-in graphics card is installed), then the Embedded Video Controller
is automatically used as the primary display even if the Embedded Video
Controller setting is set to Disabled.
Enables or disables the BIOS configuration of Single Root I/O Virtualization
(SR-IOV) devices. This option is set to Disabled by default.
If your system stops responding, this watchdog timer aids in the recovery
of your operating system. When this option is set to Enabled, the operating
Pre-operating system management applications
53
Advertisement
Table of Contents
