Table of Contents
Advertisement
Figure 78. 8 x 2.5 inch x4 PCIe U.2 NVMe SSD with FPERC11
NOTE:
Follow the sequential order as shown in the table to remove the cables, to install the cables follow the reverse
sequential order.
Table 73. 8 x 2.5 inch x4 PCIe U.2 NVMe SSD with FPERC11
Order
1
2
3
4
116
Installing and removing system components
From
SIG_PWR_1 (system board power
connector)
SL1_CPU1_PB2 (signal connector on
system board)
CTRL_SRC_PB1 (fPERC controller
connector)
CTRL_SRC_PA1 (fPERC controller
connector)
To
BP_PWR_1 (backplane power
connector)
CTRL_DST_PA1 (fPERC input
connector)
DST_PA2 and DST_PB2 (backplane
signal connector)
DST_PA1 and DST_PB1 (backplane
signal connector)
Advertisement
Table of Contents
