Table of Contents
Advertisement
Figure 42. Installing the cooling fan cage assembly
Next steps
1. If removed,
install the air shroud
2. Follow the procedure listed in
Removing a cooling fan
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
NOTE:
The procedure to remove standard (STD), high-performance silver grade (HPR SLVR), or high-performance gold
grade (HPR GOLD) fan is same.
Steps
Press the orange release tab and lift the cooling fan to disconnect the fan from the connector on the system board.
WARNING:
Ensure not to tilt or rotate the cooling fan while removing from the system.
86
Installing and removing system components
.
After working inside your
Safety
instructions.
Before working inside your
system.
system.
Advertisement
Table of Contents
