Table of Contents
Advertisement
Figure 96. 24 x 2.5 inch SAS/SATA drives with 4 x 2.5 inch drives with FPERC12.
NOTE:
Follow the sequential order as shown in the table to remove the cables, to install the cables follow the reverse
sequential order.
Table 91. 24 x 2.5 inch SAS/SATA drives with 4 x 2.5 inch drives with FPERC12
Order
1
2
3
4
5
6
7
134
Installing and removing system components
From
SIG_PWR_1 (system board power
connector)
SL1_CPU1_PB2 (signal connector on
system board)
CTRL_SRC_SB1 (fPERC controller
connector)
BP_SRC_SA2 (fPERC backplane
connector)
CTRL_SRC_SA1 (fPERC controller
connector)
SIG_PWR_2 (system board power
connector)
SIG_PWR_0 (system board power
connector)
To
BP_PWR_1 (backplane power
connector)
CTRL_DST_PA1 (fPERC input
connector)
BP_DST_SB1 (backplane signal
connector)
BP_DST_SA1 and BP_DST_SB1
(backplane signal connector)
BP_DST_SA1 (backplane signal
connector)
BP_PWR_2 (backplane power
connector)
BP_PWR_1 (backplane power
connector)
Advertisement
Table of Contents
