Table of Contents
Advertisement
Figure 33. Removing the GPU air shroud filler
Next steps
1.
Replace the GPU air shroud
Installing the GPU air shroud filler
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3.
Remove the GPU air shroud top
4. If required,
remove the full length expansion card
NOTE:
The GPU air shroud filler must be installed, if single-width GPU card or empty riser is used.
Steps
Align and install the filler into the slots on the GPU air shroud.
filler.
Safety
instructions.
Before working inside your
cover.
risers.
system.
Installing and removing system components
77
Advertisement
Table of Contents
